Up next in 10
Red and White Striped Cake With Sprinkled Shards
236K views
Sep 6, 2024
In this cake decorating tutorial I show how to tint buttercream bright red, how to apply vertical stripes, and how to jazz them up with sprinkles and sprinkled shards! For my tutorial and recipe for 4 Minute Buttercream click here: https://youtu.be/MFKfXbnU1Lw SUBSCRIBE to my channel for new cake decorating tutorials every week!
View Video Transcript
0:00
Hi! I'm Emily of British Girl Bakes and I'm going to show you how to make this
0:04
festive red and white striped cake. To start with I'll show you how to make
0:09
bright red frosting and then how to apply the stripes and add details with
0:13
sprinkles and then how to make these fun sprinkled spikes on the top and sides
0:19
For the red frosting I use my 4-Minute Buttercream and I've put the link for
0:23
that tutorial and recipe in the top of the screen and in the description below
0:27
this video. I use Americolor Super Red gel which is very concentrated and gives
0:33
a nice bright colour. Squeeze a generous squirt into your bowl of buttercream and
0:38
for these stripes you really only need between half a cup and 1 cup of
0:42
buttercream, depending on the size of your cake but I'm making a much bigger
0:47
batch here because I'll be using it for a few other cakes as well. Mix it
0:51
together and if your colour is lighter than this add some more until you get a
0:55
shade that's red rather than pink but not necessarily quite as dark and bright
0:59
as you'd like it. Then cover it up with a lid or cling film and let it sit for at
1:05
least 30 minutes to give the colour a chance to develop and darken. If you
1:10
haven't already, frost your cake and put it in the fridge for at least an hour so
1:14
that the frosting sets. Choose some sprinkles if you want to decorate your
1:18
cake with them and for the stripes I'm going to use this stencil which is
1:22
intended for bigger cakes than this 4 inch cake that I'm using for this but it
1:26
will work. Here's my red buttercream after 30 minutes and I'm going to add a
1:31
bit more colour and I'm confident this will be enough so I'm going to use it
1:35
straight away and it will darken as it sits on the cake. I'm going to use some
1:40
sellotape to hold my stencil in place but you can pin it into the cake instead
1:44
if you prefer. Take your chilled cake out of the fridge and put it on a
1:48
turntable. A turntable isn't essential but it makes the whole decorating process
1:53
much quicker. Wrap the stencil around the cake, pressing the base down onto the
1:58
cake board so that it's sitting around the very bottom of the cake and wrap it
2:02
tightly around the cake, taping it to hold it in place or pushing a pin
2:07
through the stencil and into the cake. Press the stencil against the top of the
2:12
sides of the cake as well and if it doesn't stay there you can use a clothes peg or tape or another pin to secure it. You can see that my stencil is
2:21
bowing around the cake instead of sitting tightly against the sides and
2:24
that's fine. As I mentioned before the stencil is meant for bigger cakes. Now
2:30
just spread your red buttercream onto the stencil, spreading up and down to
2:34
cover the stripe gaps from where they start at the bottom all the way up to
2:38
the top of the stripe or the top of the cake, whichever comes first. It's risky to
2:44
spread from side to side unless your stencil is pressed completely flat
2:48
against the side of the cake because buttercream can get underneath the
2:51
stencil and smudge the outline of your stripes. You can spread the buttercream
2:56
relatively thickly at first and then after applying it, swipe it up and down
3:01
with your offset spatula to spread it more thinly and evenly around the cake
3:06
When you're happy with it, pull out the pins or cut the tape and carefully peel
3:11
off the stencil. Don't expect the cake to look perfect yet. Put it back in the
3:18
fridge for about an hour so that the red buttercream sets and gets hard and then
3:23
use a sharp knife to trim off any red buttercream sticking up around the top
3:26
of the cake. This way you won't get red stains on the top of your cake
3:33
Use a knife or offset spatula to scrape around the base of the cake to take off
3:38
any red buttercream smudges on the cake board, being careful not to scrape the
3:42
cake as you go and then once you've cleaned up the cake board that's closest
3:46
to the cake, you can use a paper towel to wipe around the outer section of the
3:50
cake board. Now it's time to tidy up the stripes. Where my stencil overlapped itself, there are sections of the cake without stripes
3:59
and even within stripes there are parts where the buttercream didn't stick to
4:04
the cake and must have come off with the stencil as I pulled it off. This is a
4:08
fun opportunity to spice up the design with some sprinkles to add some texture
4:12
and detail. Where this stripe stops midway up the cake I'm adding a few
4:17
large ball sprinkles to continue the line up to the top and I'm doing the
4:21
same down here at the bottom of this stripe. You can fill in the middle of
4:26
lines too, not just the top or the bottom and it looks like an intentional part of
4:31
the design. Here I'm scraping off part of the stripe to add more sprinkles to match the other
4:40
stripes which has several sprinkles in a row instead of just one or two. If any
4:45
stripes have smudged, like this one has here, you can use a sharp knife to gently
4:50
scrape sideways to remove the smudge and this works because the base colour of
4:55
frosting, the white, is cold and hard and won't get damaged by scraping the red
5:00
gently off it. I love how asymmetrical the stripes look with some large open
5:05
spaces between some of them because it shows off the smooth frosting underneath
5:09
and looks like an intentional artistic part of the design. You could fill the
5:14
gaps with a message written sideways if you wanted to or you could reapply the
5:18
stencil and spread buttercream over it again to make more stripes but just make
5:23
sure you clean the stencil completely before you do that so you don't drag any
5:27
leftover red buttercream back onto the cake. Now I'm going to make some spikes
5:32
to add more decorations to the cake. To do this you'll need candy melts and some
5:37
sprinkles. You can use white chocolate instead but I don't recommend tinting it
5:41
red because you'll need a lot of gel and it will affect the consistency of the
5:45
chocolate and probably make it seize up. Melt the candy melts at 50% power in the
5:51
microwave for one minute at a time and then pour them onto parchment paper or
5:55
wax paper and spread them around with an offset spatula. They need to be thick
6:01
enough to withstand pressure as you push them into the cake. Scatter your
6:05
sprinkles on top immediately before the candy melts set so that they stick. Now
6:11
you can either let this set and then cut it or score it now, let it set and then
6:16
cut it and I'll show you how to do both. If you let it set or move it to the
6:22
fridge to chill it so that it sets more quickly, when you cut it with a knife
6:26
you'll get random shards of candy melts with uneven edges and unpredictable
6:30
shapes. This is the quickest way to do it and if this is the look you're going for
6:35
great! If you want a neater look with tidier shapes, before letting the candy
6:41
melt set, use a sharp knife to score where you eventually want to cut them
6:45
using straight rather than curved lines because those work best. Let the candy
6:51
melt set at room temperature or in the fridge and then cut along the lines you
6:55
scored and in most cases the candy melts should break where you intended them to
7:00
If you refrigerate your cakes after frosting and decorate them, which I do
7:04
it's best to leave your cake out at room temperature while you do this so that
7:08
the frosting softens and it's easier to arrange the spikes on it in a minute. To
7:14
place them, just hold them against the side or top of the cake and push firmly
7:18
in, holding the cake board on the other side of the cake so that the cake doesn't
7:23
slide around when you apply pressure to it. You can place the spikes in a line or
7:27
cluster or pattern or all over the cake, whatever you like! And there it is! Thank
7:34
you for watching! If you enjoyed this tutorial please click the thumbs up
7:38
button and subscribe to my channel for a new cake decorating tutorial every week
#Cooking & Recipes
#Desserts